Kranzle Stationary Cold Wall Mounted  pressure washers are from Dual Pumps and Supplied by;- Malcolm  Smith Power Cleaning - Malcleanse on-line shopping

Click on Photo or Name to take you to my on-line shop - Malcleanse.co.uk - Malcolm Smith Power Cleaning

11 Lpm at 140 Bar Kranzle Wall Mounted Single Phase Cold Pressure Washer KW11 135

11 Lpm at 140 Bar Kranzle Wall Mounted Single phase Cold Pressure Washer KW11 135 KRANZLE

Part No: KW11135

Volts: 230

Lpm: 11

Bar: 135

Kg: 85

11 Lpm at 135 Bar Wall Mounted Cold Pressure Washer Single Phase from Kranzle. Ideal for multi user situations, food processing locations or car rental sites

• Operating pressure 135 bar 2000psi Fully automatic Stop/Start operation Water flow 11 Ltrs/Min. @ 1400 rpm Max inlet water temp 60oc Required inlet water pressure 1 - 5 bar Heavy duty Stainless steel casing High pressure hose 10 m rubber coated steel braided, hygiene grade available Chemical/detergent system optional Supply 240v 13 - 14 amps 1ph 50 Hz at max performance Connection load 3.3 kw Motor output 2.4 kw Size 780 x 700 x 360mm Weight 85Kg

A well designed machine in a stainless steel casing. Ideal for multi user situations, food processing locations or car rental sites. The version with direct water feed does not re-start it\'s self due to leaks from hose joints or leaking trigger gun. The W11/135, W15/200 and W19/160 are heavy duty large pressure washers that are designed for mounting on a wall. All units are fully automatic, starting when the trigger gun is squeezed and closing down to stand by mode after a timed delay. The best system is for the machine to be connected to a cold or hot water supply with an inlet water pressure of close to 5 bar pressure with a flow of 2 to 3 litres of water above the pumps output. This ensures no cavitation of the pump, long seal life and efficient start up when the trigger gun is squeezed as the control mechanism detects flow rather than dropped pressure in the high pressure hose.

The use of a flow sensitive switching device means that these machines will not falsely start up as a result of slow pressure drop when connected to a ring main system or leaking hose joints or guns. If an internal water tank is required this can be fitted at the factory and the machine will operate using a pressure switch to activate the pump and motor when the trigger gun is squeezed, this unit is also fully automatic with a delayed shut down. The use of the highest quality materials and pump design gives outstanding performance and reliability. Of the two 3 phase machines The W15/200 has the highest operating pressure (3000 psi) whilst the W19/160 operates at a lower pressure but has more flow of water and is capable of running two trigger guns at a time.

15 Lpm at 200 Bar Kranzle Wall Mounted Cold Three Phase Pressure Washer KW15220

15 Lpm at 200 Bar Kranzle Wall Mounted Cold Pressure Washer KW15220 KRANZLE

Part No: KW15220

Volts: 415

Lpm: 15

Bar: 200

Kg: 85

15 Lpm at 200 Bar Wall Mounted Cold Pressure Washer Three Phase from Kranzle. Ideal for multi user situations, food processing locations or car rental sites

• Operating pressure 200 bar 3000 psi Automatic Stop/Start with delayed shutdown Nozzle size 2505 Water flow 15 Ltrs/Min. @ 1400 rpm Max inlet water temp 60oc Required inlet water pressure 1 - 5 bar High pressure hose 10 m rubber coated long life steel braided, hygiene grade available Chemical/detergent system - Optional Supply 400 - 415v 12.5 amps 3ph 50 Hz Connection load 7.5 kw Motor output 5.5 kw (7.5 HP) Stainless steel construction Size 780 x 700 x 360mm Weight 85Kg

This is a very robust machine with high output and can be connected to a hot water supply. Ideal for factories and food preparation areas. The W11/135, W15/220 and W19/160 are heavy duty large pressure washers that are designed for mounting on a wall. All units are fully automatic, starting when the trigger gun is squeezed and closing down to stand by mode after a timed delay. The best system is for the machine to be connected to a cold or hot water supply with an inlet water pressure of close to 5 bar pressure with a flow of 2 to 3 litres of water above the pumps output. This ensures no cavitation of the pump, long seal life and efficient start up when the trigger gun is squeezed as the control mechanism detects flow rather than dropped pressure in the high pressure hose. The use of a flow sensitive switching device means that these machines will not falsely start up as a result of slow pressure drop when connected to a ring main system or leaking hose joints or guns.

If an internal water tank is required this can be fitted at the factory and the machine will operate using a pressure switch to activate the pump and motor when the trigger gun is squeezed, this unit is also fully automatic with a delayed shut down. The use of the highest quality materials and pump design gives outstanding performance and reliability. Of the two 3 phase machines The W15/200 has the highest operating pressure (3000 psi) whilst the W19/160 operates at a lower pressure but has more flow of water and is capable of running two trigger guns at a time.

19 Lpm at 160 Bar Kranzle Wall Mounted Three Phase Cold Pressure Washer KW19160

19 Lpm at 160 Bar Kranzle Wall Mounted Cold Pressure Washer KW19160 KRANZLE

Part No: KW19160

Volts: 415

Lpm: 19

Bar: 160

Kg: 85

19 Lpm at 160 Bar Wall Mounted Cold Pressure Washer Three Phase from Kranzle. Ideal for multi user situations, food processing locations or car rental sites.

• Operating pressure 160 bar 2400 psi Automatic Stop/Start with delayed shutdown Nozzle size 2507 or 2 x 2504 Can be set up to operate 2 gun/lances - Optional Water flow 19 Ltrs/Min. @ 1400 rpm Max inlet water temp 60oc Required inlet water pressure 1 - 5 bar High pressure hose 10 m rubber coated long life steel braided, hygiene grade available Chemical/detergent system - Optional Supply 415v 12.5 amps 3ph 50 Hz Connection load 7.5 kw Motor output 5.5 kw (7.5 HP) Stainless steel construction Size 780 x 700 x 360mm Weight 85Kg This is a very robust machine with a high volume of water output that can be split between two guns and lances. This unit can be connected to a hot water supply.

Ideal for factories and food preparation areas. The W11/135, W15/200 and W19/160 are heavy duty large pressure washers that are designed for mounting on a wall. All units are fully automatic, starting when the trigger gun is squeezed and closing down to stand by mode after a timed delay. The best system is for the machine to be connected to a cold or hot water supply with an inlet water pressure of close to 5 bar pressure with a flow of 2 to 3 litres of water above the pumps output. This ensures no cavitation of the pump, long seal life and efficient start up when the trigger gun is squeezed as the control mechanism detects flow rather than dropped pressure in the high pressure hose.

The use of a flow sensitive switching device means that these machines will not falsely start up as a result of slow pressure drop when connected to a ring main system or leaking hose joints or guns. If an internal water tank is required this can be fitted at the factory and the machine will operate using a pressure switch to activate the pump and motor when the trigger gun is squeezed, this unit is also fully automatic with a delayed shut down. The use of the highest quality materials and pump design gives outstanding performance and reliability. Of the two 3 phase machines The W15/200 has the highest operating pressure (3000 psi) whilst the W19/160 operates at a lower pressure but has more flow of water and is capable of running two trigger guns at a time.

Click here to go to my online shop  - STATIONAY COLD  PRESSURE WASHERS