FOOD FOR THOUGHT !
Whilst the very cheap Pressure Washers (less than A FEW HUNDRED POUNDS) may look tempting, they don’t actually work very well. The fact is that all Pressure Washers need a high quality pump and motor, it is simply not possible to put quality components into a machine at this price.

A significant number of our customers are people who have bought one of these cheap machines from ‘The Internet’ or ‘The Home Shopping Channels’ – then discovered that the machine they have bought is virtually useless and then have to upgrade to a usable machine having wasted YOUR MONEY!

All my Pressure Washers are built to a high standard, built to be used and last. All the engines -  if I say they are HONDA then they are Honda and not a cheep “look a like” copy!

All the pressure washers on my site I can get SPARE PARTS for – Ask yourself if you can on the “stack’em high sell’em cheap” ones ?

Need a new or extra Hose or Gun – we waste so much time (your time as well) trying to fit up a gun or hose with the same FITTINGS to a cheep imported machine (some have way-out fitting sizes and couplers.) Some of the cheep imported washers do not have a name or model number on the PUMP – How the hell can we get spares for these? – you can’t – bin it!

GO TO Electric Pressure Washers

GO TO Petrol Pressure Washers

GO TO Diesel Pressure Washers

 

Note:- You cannot GET MORE OUT THAN YOU PUT IN!
 

 

	If you run "ANY MAKE" of pressure washer from a 13 amp socket you  can only convert this into about 10 lpm flow at about 125 Bar.
	To get more flow and/or pressure you need a three phase supply (415 volts) or an engine driven machine.
	If you use an "extension lead"  you must keep it as short as possible and it needs to be a heavy one - 2.5mm2 cable.
	We supply Kranzle Pressure Washers - Why - They are distinguished by their extraordinarily high quality, extremely modern design, high grade material, long service life and economic efficiency. - The heart of each high-pressure washer is the pump. The Kranzle pump heads are made completely of forged brass to ensure top quality and long service life. Plus the fact that I (Malcolm) likes a simple life - when we sell a Kranzle Pressure Washer we know that it will give very good service and this means less telephone calls and more time to go fishing!

 

Flow & Pressure

Flow now days is measured in LITRES PER MINUET = LPM

1 Imperia Gallon (UK Gallon) = 4.54609 Litres

1 US Gallon is only 0.83267418 Imperial (UK) gallon

1 US Gallon = 3.785411784 Litres

* Flow from an outside tap will vary - It may not be constant due to other making demands on the water elsewhere.

(To TEST THE FLOW - Use a bucket and measure how much water cones out in 1 minute)

If it is not at least 10% higher than what your pressure washer needs then its "NO GOOD" - Use a holding tank and draw from there.

ONLY USE A SMALL Pressure Washers direct from mains -

If a pressure washer pump is only partly starved of water then what is called Cavitation happens - Cavitation is, an undesirable occurrence. In devices such as pressure washers cavitation causes a great deal of noise, damage to components, vibrations, and a loss of efficiency.

Some think that if an outside tape delivers 10 lpm and the pressure washer needs 11 lpm then all what will happen is the flow rate of the pump will go down - RUBBISH - It will kill the pump very fast.

 

Pressure is measured in Bars or PSI

PSI = pound per square inch or, more accurately, pound-force per square inch

1 BAR = 14.5 PSI

So a pump that delivers say 2000 psi is the same as one that delivers 138 Bar

 

Electrical Horsepower (HP)

Electrical horsepower is used by the electrical industry for electrical machines and is defined to be exactly 746 W.

The nameplates on electrical motors show their power output, not their power input.

1 HP = 0.746 KW (Kilowatt)

So a 3 hp motor = 2.2 kw

 

What FITTING SIZE ?

To Start off with we get more trouble with fittings than any other products.
Below are some "tips" - forgive me if I sound like "teaching Granny to suck eggs" - but belive me !!!!!!! 
So lets start from the begining.

Q) What is a MALE THREAD  & what is a FEMALE THREAD ?
A) A male thread screws into a female thread - as simple as that.

Below is a MALE Threaded Nipple (sometimes this is called a Hex Nipple)

Pipe Thread Sizes

BSP

British Standard Pipe thread (BSP thread) is a family of standard screw thread types that has been adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.

Two types of threads are distinguished:

	Parallel ('straight') threads, BSPP (British Standard Pipe Parallel Thread), which have a constant diameter.
	Taper threads, BSPT (British Standard Pipe Taper Thread), whose diameter increases or decreases along the length of the thread.

Q) What SIZE THREAD ?
A) Take a cross section measurement across the threaded end of a MALE fitting or the measurement across the inside of a FEMALE fitting. - LOOK IT UP ON THE CHART BELOW. 

                        
BSP FITTINGS

                             Cross Section Measurement
Fitting Size       Female      Male
1/8" BSP           8.566mm      9.728mm
1/4" BSP          11.445mm   13.157mm
3/8" BSP          14.950mm   16.662mm
1/2" BSP          18.631mm    20.955mm
3/4" BSP          24.117mm    26.441mm
1" BSP             30.291mm    33.249mm
1 1/4" BSP       38.952mm    41.910mm
1 1/2" BSP       44.324mm    47.803mm
2" BSP             56.656mm    59.614mm
 

METRIC FITTINGS

                             Cross Section Measurement

Fitting Size       Female      Male
M12                 10.105mm      12mm
M14                 11.835mm      14mm
M16                 13.835mm      16mm
M18                 15.294mm      18mm
M21                 18.294mm      21mm
M22                 19.294mm      22mm
M24                 20.752mm      24mm
M27                 23.752mm      27mm
M30                 26.211mm      30mm

Remember the Cross Section Measurement of a fitting is not the fitting size if it is a "BSP" THREAD - use the chart above.

Metric Fittings - the MALE is always Cross Section Measurement in "mm" the female will be smaller.

Metric threads are a little bit finer than BSP threads.

LOOK OUT FOR 1/2" BSP and M22 Fittings - they can look the same - take a good look and the M22 will be finer than 1/2

 

Now just when you think you got it all onboard - just to make things interesting there is a thread called  "NPT"

This is a USA thread and is not used much in the UK, BUT, yes there is always a BUT !  Some equipment and parts come in from across the "pond" and they can be a "B******"  to find high pressure fittings for.

NPT

National Pipe Thread Tapered Thread (NPT) is a U.S. standard for tapered threads used to join pipes and fittings.

  Cross Section Measurment
NPT FITTINGS
Fitting Size          Male    Threads per Inch
1/8" NPT               10.28mm     27 tpi
1/4"NPT                13.72mm     13 tpi
3/8" NPT               17.15mm     18 tpi
1/2" NPT               21.34mm     14 tpi
3/4" NPT               26.67mm     14 tpi
1" NPT                  33.40mm     11.5 tpi

Malcolm Smith Power Cleaning can supply NPT fittings (NPT to BSP)

TO GO 2 My Web Shop - click here

High Pressure Hose Sizes

Pressure Washer Hose is graded by pressure, temperature, and fluid compatibility. The hose is built up with rubber and steel layers. A rubber interior is surrounded by multiple layers of woven wire and rubber. The exterior is designed for abrasion resistance.

It comes in TWO TYPES - 1 WIRE & 2 WIRE

1 WIRE Hose has 1 steel wire and in most cases will take pressures up to about 150 - 210 bar (3000psi) at a temperature of 150c

2 WIRE Hose has 2 steel wires and will take pressures up to about 400 bar (5800psi) at a temperature of 150c

The DN code is a code that rounds off the diameter of the pipe to get an even number to work with, not the exact diameter. The American version is called NPS and is in English units.

DN is the European version and is based on millimetres. For example, If you want 2" Pipe, NPS calls it 2" and DN calls it 50 mm. but the actual outside diameter is neither 2" or 50 mm. They just use these nice round numbers cause it is easier!

For PRESSURE WASHER High Pressure Hose - We in the UK commonly use Two BORE SIZES  (1/4" & 3/8")  sometimes a third (1/2")

The BORE SIZE or "id" can be referred to as below:-

NPS	DN mm
⅛	6
¼	8
⅜	10
½	15
¾	20
1	25
1¼	32
1½	40
2	50
2½	65
3	80

Drain / Sewer Cleaning Hose

Most Drain / Sewer Hose because it has to be "flexy" is 6DN (1/8" Bore)

The Drain / Sewer Hose we supply is 6DN - 300 Bar rated - 100c - single wire braid & thin rubber cover.

 

Pressure Control Valves

You have to control the pressure on the output side pf a pressure washer pump.

To do this a "CONTROL VALVE" is needed.

Q - What is meant by a "by-pass"

A - When a control valve goes into by-pass it's when the trigger is released, the valve discharges the water back to the holding tank, on controlsets the waster is diverted straight back to the pump. If the water goes back to the pump then the pump must not be in this mode for very long (a few minutes at the most) as the water will get hot. However if the by-pass valve sends the water back to the holding tank then the water going through the pump is cold a no damage will be done due to hot water.

There are 4 Main types:-

Controlsets

Controlsets are trapped pressure valves with internal by-pass and  most have an integral low pressure chemical injection system built in.

These controlsets are usually only the smaller output pumps.

Pressure Regulating Valves

Pressure regulating valves are used to regulate pressure and protect the system when the discharge is closed.

Trapped Pressure Unloader Valves

Trapped pressure valves regulate the pressure and when in by-pass mode this type of valve maintains a constant line pressure with zero pump pressure but line pressure is trapped (high),

Flow Senstive Unloader Valves

Flow sensitive unloader valve regulate the pressure and when in by-pass mode this valve reduces the discharge line and pump pressure to zero

 

 

Safety Relief Valves

Safety relief valves are placed onto pumps (need to be fitted to larger pumps to protect the pump, system and people) - It is set to unload at a higher pressure than the control valve but still under the maximum system pressure. - IMPORTANT Safety Relief Valves must never be used in place of a pressure regulator or unloader valve.

TO GO 2 My Web Shop - click here

NOZZLES

Nozzles are sized to the FLOW & PRESSURE of the PUMP

To find the right size nozzle look along the "TOP LINE" and find the Pressure output of your pump in bars.

Follow the column down untill you find the FLOW output (this is in litres per min).

Then follow the line across to the left and fine the nozzle size in the left hand column.

xp; Pump pressureE 120 BAR; Flow rate 11 lpm nozzle size 045

 

mm	SIZE	50	90	100	110	120	130	140	150	200	250	300	400	500
1.00	02	3.2	4.2	4.5	4.7	4.8	5.0	5.3	5.4	6.3	7.0	7.7	8.9	9.9
1.10	025	4.0	5.3	5.6	5.9	6.1	6.4	6.6	6.9	8.0	9.0	9.9	11.4	12.7
1.18	03	4.8	6.3	6.8	7.1	7.4	7.7	8.0	8.3	9.6	10.7	11.8	13.5	15.1
1.30	035	5.5	7.4	7.8	8.2	8.6	8.9	9.2	9.5	11.0	12.3	13.8	15.5	17.8
1.35	04	6.6	8.9	9.4	9.8	10.3	10.7	11.1	11.5	13.3	14.8	16.3	18.7	20.9
1.40	045	7.1	9.6	10.2	10.5	10.9	11.4	11.8	12.2	14.1	15.8	17.4	19.9	22.3
1.55	05	8.0	10.7	11.3	11.8	12.4	12.9	13.4	13.8	16.0	17.9	19.7	22.6	25.3
1.60	055	8.7	11.8	12.4	13.0	13.6	14.1	14.7	15.2	17.5	19.6	21.7	25.0	28.0
1.72	06	9.6	12.8	13.6	14.3	14.9	15.5	16.0	16.7	19.2	21.5	23.7	27.1	30.3
1.75	065	10.4	14.0	14.7	15.4	16.1	16.8	17.4	18.0	20.8	23.2	25.6	29.3	32.7
1.80	07	11.2	15.0	15.8	16.6	17.3	18.0	18.7	19.3	22.3	25.0	27.1	31.3	35.0
1.90	075	12.0	16.1	16.9	17.7	18.5	19.3	20.0	20.7	23.9	26.7	29.4	33.7	37.7
2.05	08	12.7	17.1	18.0	18.9	19.7	20.5	21.3	22.0	25.5	28.5	31.4	35.9	40.2
2.08	085	13.5	18.1	19.1	20.0	20.9	21.8	22.6	23.4	27.0	30.2	34.5	39.8	44.5
2.10	09	14.3	19.2	20.2	21.2	22.1	23.0	23.9	24.7	28.6	31.9	35.1	40.2	45.0
2.30	10	16.0	21.4	22.5	23.6	24.6	25.6	26.6	27.6	31.8	35.6	39.2	44.9	50.2
2.42	11	17.3	23.3	24.5	25.7	26.9	28.0	29.1	30.1	34.7	38.8	43.4	50.1	56.0
2.50	12	18.9	25.4	26.8	28.1	29.4	30.6	31.7	32.8	37.9	42.4	46.7	53.4	59.8
2.55	13	20.5	27.5	29.0	30.4	31.8	33.1	34.4	35.6	41.1	45.9	50.5	57.8	64.7
2.60	14	22.1	29.6	31.3	32.8	34.2	35.6	37.0	38.3	44.3	49.4	55.0	63.5	71.0

 

Stainless Steel 1/4" BSP MALE Thread - NOZZLES


  Impact MEG Nozzles





0 Deg =    0 degree Pencil Jet

15 Deg = 15 degree Fan Jet

25 Deg =  25 degree Fan Jet



40 Deg =  40 degree Fan Jet

 

 

 1/4" Male Impact MEG Nozzles
 

Size:	0 Deg:	15 Deg:	25 Deg:	40 Deg:
01		N141501	N142501
013
015			N1425015
02		N141502	N142502	N144002
025		N1415025	N1425025
03	N14003	N141503	N142503	N144003
035	N140035	N1415035	N1425035	N1440035
04	N14004	N141504	N142504	N144004
045	N140045	N1415045	N1425045	N1440045
05	N14005	N141505	N142505	N144005
055	N140055	N1415055	N1425055	N140055
06	N14006	N141506	N142506	N144006
065	N140065	N1415065	N1425065	N1440065
07	N14007	N141507	N142507	N144007
075	N140075	N1415075	N1425075	N1440075
08	N14008	N141508	N142508	N144008
09	N14009	N141509	N142509	N144009
10	N14010	N141510	N142510	N144010
12	N14012	N141512	N142510	N144012
125		N1415125
13	N14013	N141513	N142513	N144013

 

Chemical Nozzle Size 4040 (for use with twin lance and CHEMICAL INJECTION -= - N4040B

 

Other sizes are available on request.
We can also get to order:-
1/8" BSP MALE Threaded Nozzles
1/4" NPT & 1/8" NPT MALE Threade Nozzles

 

TO GO 2 My Web Shop - click here

 

Quick Connect Pressure Washer Nozzles

 

 

These are constructed with a 11.6mm male plug that snaps into a quick female coupler on the end of the lance. This coupler contains an o-ring to facilitate a tight seal. All quick disconnect female couplers in a pressure washing system contain these o-rings. It's important that pressure washer nozzles snap tightly into the female coupler. These pressure washer nozzles are colour coded to indicate what pattern (degree) of fan spray they produce.
 

 

 

For Quick Release Nozzle Sets - click here




TO GO 2 My Web Shop - click here

 

 RED NOZZLE - 0 DEG - click here


 

YELLOW NOZZLE - 15 DEG - click here







GREEN NOZZLE - 25 DEG - click here







WHITE NOZZLE - 40 DEG - click here

BLACK NOZZLE - (Chemical Nozzle)
click here


TO GO 2 My Web Shop - click here

 

TURBO NOZZLES

Some call these Nozzles - Turbo Nozzles others call them Rotating Nozzles and other's DIRTKILLER Nozzles.

All the Turbo Nozzles below have 1/4" Female BSP Threads.

To make these Turbo Nozzles into QUICK CHANGE Type (Mini Quick Release) all you need is -

QRP116M14M











Turbo Nozzles - Up to 200 Bar

1/4" BSP FEMALE Fitting

Size:
035 - ART25172035
04  -  ART25172040
045 - ART25172045
05  -  ART25172050
055 - ART25172055
065 - ART25172065

Turbo Nozzles - Up to 320 Bar

1/4" BSP FEMALE Fitting - Max Temp 90c

Size:
11 - R653511
12 - R653512
15 - R653515
20 - R653520
25 - R653525

Turbo Nozzles - Up to 350 Bar

1/4" BSP FEMALE Fitting - Max Temp 90c

Size:
035 - ART25173535
045 - ART25173545
055 - ART25173555
065 - ART25173565
09  -  ART25173590

Turbo Nozzles - Up to 400 Bar

1/4" BSP FEMALE Fitting - Max Temp 90c

Size:
035 - R200458635
04  -  R200458640
045 - R200458645
05 -   R200458650
055 - R200458655
06 -   R200458660
065 - R200458665
07 -   R200458670
08 -   R200458680
09 -   R200458690
10 -   R200458610

500. 700 1000 Bar Turbo Nozzles - To Order
Call Malcolm

TO GO 2 My Web Shop - click here

 

Use your Pressure Washer to clean and unblock DRAINS / PIPES etc..
DRAIN NOZZLES

Pick a Drain Nozzle to suit the output of your pump.
(use nozzle guide - click here)
Most small pressure washers with an output of around 10 lpm at 140 Bar (2000psi) a 04 Nozzle will do.
If you have a bigger - say petrol driven pressure washer deliveing somewhere about 15 lpm at 200 Bar (3900psi) then use a 045 / 05 Size Nozzle.

A Drain / Sewer Nozzle WITHOUT a FORWARD facing hole will produce more thrust to help the hose work its way up the pipe - however if you have a forward FACING HOLE this will help to "push through" any blockage.

A "Rotating Nozzle" will clean the side walls of the pipe better but has a lot less thrust.

The other larger SEWER NOZZLES need high flow rate and/or  more pressure.


  Stainless steel drain nozzles
  With Out FORWARD HOLE
  With FORWARD HOLE
All have rear facing holes for thrust.

 

	Nozzle WITHOUT FORWARD HOLE			Nozzle WITH FORWARD HOLE
Diameter	15mm	19mm	24mm	15mm	19mm	24mm
Nozzle THREAD	1/8" F	1/4" F	3/8" F	1/8" F	1/4" F	3/8" F
Nozzle Size
035		R65105
04	R65005	R65104		R122370170	R65114	R65188
045	R65000	R65100
05		R65108		R65060	R65113
055	R65009	R65116		R65050	R65115	R65187
06	R65010			R65055
065		R65110		R65056		R65189
07			R65184
075					R65120
08						R65186
09	R65040	R65140

 

 ROTATING DRAIN NOZZLE




 

	Rotating Drain Nozzle
Nozzle THREAD	1/8" F	1/4" F	3/8" F
Diameter	15mm	19mm	24mm
Nozzle Size
035
04			R200049860
045			R200049870
05	R200049830	R200049800	R200049880
055
06	R200049840	R200049810	R200049890
065
07
075
08	R200049850	R200049820
09

TO GO 2 My Web Shop - click here

 You may need this ?

 If YOUR Drain Hose has a 1/8" BSP MALE and you are fitting a 1/4" FEMALE Drain Nozzle you will need a ...
1/8" Female x 1/4" MALE BUSH - RB14M18F

If YOUR Drain Hose has a 1/8" BSP MALE and you are fitting a 3/8" FEMALE Drain Nozzle you will need a ...
3/8" BSP Male x 1/8" BSP Female - Reducing Bush - RB38M18F

Drain Hose / Sewer Hose / Drain Jetting Hose

FLEXY Hose with wire braid and thin rubber cover
Inlet - M22
Outlet - 1/8" MALE BSP
Max Pressure - 300 Bar
Max Temp - 100c

10m Sewer Cleaning Hose - R420310010
15m Sewer Cleaning Hose - R420310015
20m Sewer Cleaning Hose  -R420310020
30m Sewer Cleaning Hose  -R420310030
IF YOU REQUIRE 1/4" MALE OUTLET (NOZZLE END) USE "ADD-ONS"
We can supply other DRAIN / SEWER HOSE'S with different ends to suit your system - Please Ask.


   High Volume Rotary Drain Nozzles

Manufactured in 420B Stainless Steel, tempered & Hardened to HRC55.
All heads have 6 rear facing jets for thrust and 2 for rotation. Jets are replaceable & manufactured in Stainless Steel.
Head rotates in anti-clockwise direction.

 

High Volume Rotary Drain Nozzles
Diameter	35mm	49.5mm	49.5mm	49.5mm	49.5mm
Length	78mm	100mm	100mm	100mm	100mm
Nozzle THREAD	1/2" F	3/4" F	3/4" F	1" F	1" F
Nozzle Size
20	25124620
30		25124730
040			25124740
50				25124950
70					25124970

TO GO 2 My Web Shop - click here

Sewer Nozzle BV406


Stailless Steel with exchangeable inserts.
Extreame pulling power and cleaning power.
Applications - Removal of deposits and blockages.



 

Sewer Nozzle BV406 - 250Bar
Diameter	45mm	55mm	70mm	45mm	55mm	70mm
Pipe Size (min) From	60mm	60mm	100mm	100mm	150mm	150mm
Length	55mm	100mm	105mm	55mm	100mm	105mm
REAR JETS	6 (M6)	6 (M6)	4+4(M8)	4+4(M8)	4+4(M10)	4+4(M10)
FRONT JETS	0	1(M6)	0	1(M8)	0	1(M10)
FLOW (LPM)	40-80	40-80	100-200	100-200	180-340	180-340
Nozzle THREAD	1/2" F	1/2" F	3/4" F	3/4" F	1" F	1" F
PRODUCT	R65210001	R65210002	R65210003	R65210004	R65210005	R65210006

 

Sewer Nozzle Ba - 250 Bar

Stailless Steel with exchangeable inserts.
Extreame pulling power and cleaning power.
Applications - All round cleaning of dirty or blocked sewers.

TO GO 2 My Web Shop - click here
 

Sewer Nozzle Ba - 250 Bar
Diameter	70mm	70mm	75mm	70mm	70mm	75mm
Pipe Size (min) From	100mm	100mm	150mm	150mm	200mm	200mm
Length	100mm	135mm	160mm	100mm	135mm	160mm
REAR JETS	6 (M6)	6 (M6)	6(M8)	6(M8)	6(M10)	6(M10)
FRONT JETS	0	1(M6)	0	1(M8)	0	1(M10)
FLOW (LPM)	40-100	40-100	80-200	80-200	200-400	200-400
Nozzle THREAD	1/2" F	1/2" F	3/4" F	3/4" F	1" F	1" F
PRODUCT	R65220001	R65220002	R65220003	R65220004	R65220005	R65220006

Milling Type Sewer Nozzle FR - 250 Bar

Stailless Steel with 3 Sharp cutting edges provide excellent milling sffect.
3 or 4 jets to front, Pressure Max 250 Bar;
Extreame pulling power and cleaning power.
Applications - Completety blocked pipes.

 

Milling Type Sewer Nozzle FR - 250 Bar
Diameter	19mm	25mm	729mm	738mm	50mm	60mm
Pipe Size (min) From	30mm	50mm	60mm	80mm	120mm	200mm
Length	29mm	50mm	61mm	71mm	95mm	120mm
REAR JETS	4	4	6	6	6	6
FRONT JETS	4	4	4	4	4	4
FLOW (LPM)	20-40	30-60	50-90	90-180	200-360	200-360
Nozzle THREAD	1/4" F	3/8" F	1/2" F	3/4" F	1" F	1" F
PRODUCT	R65230001	R65230002	R65230003	R65230004	R65230005	R65230006

Rotating Nozzle RH - 1000 Bar

Stailless Steel Rotating Nozzle  - Body hp-bronze - Compact model - universally - Extreame cleaning performance, removes hard deposits.

 

Rotating Nozzle RH - 1000 Bar
Diameter	10mm
Pipe Size (min) From
Length	63mm
SIDE JETS	2
FLOW (LPM)	14
Nozzle THREAD	1/4" F
PRODUCT	R652810010

Rotating Nozzle RD - 250 Bar

Stailless Steel Rotating Nozzle  - Brazen rotating body - excellent cleaning by rotating jets. Exchangeable inserts included. Excellent pulling power by return beams specially placed.

 

Rotating Nozzle RH - 1000 Bar
Diameter	29mm
Pipe Size (min) From	40mm
Length	50mm
REAR JETS	4
FRONT JETS	3
FLOW (LPM)	20-40
Nozzle THREAD	1/4" F
PRODUCT	R65250001

** When placing order - Please state Flow and Pressure

 

TO GO 2 My Web Shop - click here

Video's

See the KRANZLE Pump (Video) - click here

OERTZEN Video click here

Whirl a Way in action - click here

Video about The ZETA PRESSURE WASHER - click here

Video - Extending Lance in Action - click here

Video - Waterbroom in Action - click here

Thor Diesel Pressure Washer - Video - click here

Chewing Gum Remover - The Gum Blaster - Video - click here

k o

 

i  * u   * p * a *