Anti Graffiti Coatings for Wall & Buildings
THE HOME OF MALCLEANSE
Info & Technical Stuff
 |
Nu-Cryl AG Clear Protection - PermanentEconomical Clear Protection for
Brick, Stone and Concrete |
||
This Product is an acrylic-based impregnation coating for exterior surfaces. Applied by brush or airless spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to 'breathe' This Product will not noticeably change the surface appearance and graffiti can be effectively removed using AG3 Graffiti Remover. No reapplication of this product is necessary after graffiti removal. The consistency of this product allows excellent coverage rates, making it an extremely cost effective method of achieving long life protection. Suitable for application to brickwork, concrete, natural stone, reconstructed stone, granite, marble and terrazzo.
|
|||
® A.G.
DESCRIPTION:
Nu-Cryl A.G. is a unique, clear, hydrophobic acrylic coating system.ADVANTAGES: Nu-Cryl A.G. will not noticeably change the appearance of the
substrate. Due to its excellent stain resistant and water repellent qualities,
dirt, pollution, and even graffiti can be removed from the treated surface.
The system gives long life graffiti and environmental protection.
It has outstanding resistance to weathering and ultra-violet
degradation, and no reapplication is required after graffiti removal.
Satisfies Class’0’ requirements of current Building Regulation.
USES: For use on brickwork, concrete, natural stone, reconstructed stone
and blockwork, marble and terrazzo.
Compatible with concrete surfaces treated with Silane. Allow 72 hours
to lapse before overcoating surfaces treated with Silane.
COLOUR RANGE: Colourless
PACK SIZE: Single component product supplied in 5 or 25 Litre drums.
COVERAGE RATE: This is dependant on texture and porosity of the substrate.
The figures quoted below are given only as guidance.
Granite………….....15m˛/Ltr Marble………..………13m˛/Ltr
Block paving…..……8m˛/Ltr Engineering brickwork…8m˛/Ltr
Concrete…………….5m˛/Ltr Facing brickwork………5m˛/Ltr
Concrete blockwork…3m˛/Ltr Self coloured render……3m˛/Ltr
DRYING TIME: Touch dry:………1-2 hours.
Overcoat:………..Immediately after the first application.
Fully dry:………..24 hours.
PREPARATION: Ensure surface to be treated are clean, free from contamination and dry.
APPLICATION: Application by low pressure spray or by brush/roller taking care to avoid
any sagging. One application is normally required, however on porous
substrates a second application may be required.
Apply the second application in the same manner immediately after the first
application, taking care not to allow the first application to dry out.
EQUIPMENT CARE: All equipment should be cleaned with water immediately after use.
STORAGE: Store away from direct sunlight and sources of heat. Protect from frost.
SHELF LIFE: 6 months (in original sealed container).
HEALTH & SAFETY: Refer to health and safety sheets.
THE HOME OF MALCLEANSE
01225 707200
(Monday - Friday 8.00am - 6.00pm)
(Saturdays - 8.00am - 12.30pm)
We are a small family business selling quality products for use in Domestic, Commercial & Industrial environments.
Graffiti Protection Coatings Nu Cryl Masonary Aniti Graffiti Coat